Step 1. Remove gun from mount
Using plyers remove the retaining pin from the rear elevation adjustment.
Un-screw the nut on the bolt that secures the action to the mount.
Pull the retaining pin out
You can now lift the gun straight up and off the mount.
I put the retaining pin back so it does not get lost.
un-screw the bolt that holds the locking ring in place.
Seperate the ring and pull it forward to clear the mount. Note that on the front of the pintel there is a groove to accept the bolt of the locking ring.
The upper mount can now be lifted off the lower half.
The parts.
Next >>