Ensure that the gun is unloaded and remove the Magazine
let the bolt forward
Locate and press down the botton for the stock catch
Slide the stock off the back of the receiver
Turn the gun over and press down the trigger group locking stud
Slide the trigger group to the back of the receiver
The group may catch on the bolt, in wich case hold down the trigger to release it further
Receiver and trigger group. Inside of the receiver you can see the bolt, recoil spring and brass H-bar
Receiver, trigger group and stock
Top view of the trigger group
Close-up of inside the receiver
View of the bolt as it recoils back
Locate the recoil spring guide on the back of the receiver
Press the guide in and
Remove from the receiver
Slide the bolt back
And lift out of the receiver
Slide the cocking handle forward again
And remove the H-bar
Slide the cocking handle back so that it is aligned with the hold at the end of its track. Lift it out
Inside view of the receiver
Press in the ends of the felt oilers and remove
Felt oilers
Disassembled